LNK606DG-TL Electronic IC Chip Energy - Efficient , Accurate CV / CC Switcher

LNK603-606/613-616 LinkSwitch-II Family

Energy-Efficient, Accurate CV/CC Switcher for Adapters and Chargers

Product Highlights

Dramatically Simplifies CV/CC Converters

• Eliminates optocoupler and all secondary CV/CC control circuitry

• Eliminates all control loop compensation circuitry

Advanced Performance Features

• Compensates for transformer inductance tolerances

• Compensates for input line voltage variations

• Compensates for cable voltage drop (LNK61X series)

• Compensates for external component temperature variations

• Very tight IC parameter tolerances using proprietary trimming technology

• Frequency jittering greatly reduces EMI filter cost

• Even tighter output tolerances achievable with external resistor selection/trimming

• Programmable switching frequency up to 85 kHz to reduce transformer size

Advanced Protection/Safety Features

• Auto-restart protection reduces power delivered by >95% for output short circuit and control loop faults (open and shorted components)

• Hysteretic thermal shutdown – automatic recovery reduces power supply returns from the field

• Meets high voltage creepage requirements between DRAIN and all other pins both on the PCB and at the package

EcoSmart® – Energy Efficient

• Easily meets all global energy efficiency regulations

• No-load consumption below 30 mW at 230 VAC with optional external bias winding

• ON/OFF control provides constant efficiency down to very light loads – ideal for CEC and ENERGY STAR 2.0 regulations

• No current sense resistors – maximizes efficiency

Green Package

• Halogen free and RoHS compliant package

Applications

• Chargers for cell/cordless phones, PDAs, MP3/portable audio devices, adapters, LED drivers, etc.

Description

The LinkSwitch-II dramatically simplifies low power CV/CC charger designs by eliminating an optocoupler and secondary control circuitry. The device introduces a revolutionary control technique to provide very tight output voltage and current regulation, compensating for transformer and internal parameter tolerances along with input voltage variations.

The device incorporates a 700 V power MOSFET, a novel ON/OFF control state machine, a high voltage switched current source for self biasing, frequency jittering, cycle-by-cycle current limit and hysteretic thermal shutdown circuitry onto a monolithic IC.

Absolute Maximum Ratings^(1,4)

DRAIN Voltage .........................................................-0.3 V to 700 V

DRAIN Peak Current: LNK603/613...................320 (480) mA⁽⁴⁾

LNK604/614 .................. 400 (600) mA⁽⁴⁾

LNK605/615 .................. 504 (750) mA⁽⁴⁾

LNK606/616.................. 654 (980) mA⁽⁴⁾

Peak Negative Pulsed Drain Current ............................ -100 mA⁽²⁾

FEEDBACK Pin Voltage ............................................... -0.3 V to 9 V

FEEDBACK Pin Current ...................................................... 100 mA

BYPASS Pin Voltage ..................................... ............. -0.3 V to 9 V

Storage Temperature ........................................... -65 °C to 150 °C

Operating Junction Temperature ......................... -40 °C to 150 °C

Lead Temperature⁽³⁾ .......................................................... 260 °C

Notes:

1. All voltages referenced to SOURCE, T_A = 25 °C.

2. Duration not to exceed 2 msec.

3. 1/16 in. from case for 5 seconds.

4. The higher peak DRAIN current is allowed while the DRAIN voltage is simultaneously less than 400 V.

5. Maximum ratings specified may be applied, one at a time without causing permanent damage to the product. Exposure to Absolute Maximum ratings for extended periods of time may affect product reliability.

Stock Offer (Hot Sell)

electronic integrated circuit

linear integrated circuits

LNK606DG-TL Electronic IC Chip Energy - Efficient , Accurate CV / CC Switcher Images