TPS54360DDAR 60 Vin 3.5 A Constant Voltage Regulator Circuit Switching Voltage Regulators

TPS54360DDAR Power Regulator IC Switching Voltage Regulators 60 Vin,3.5 A

1 Features

• 4.5-V to 60-V (65-V Abs Max) Input Range

• 3.5-A Continuous Current, 4.5-A Minimum Peak

  Inductor Current Limit

• Current Mode Control DC/DC Converter

• 92-mΩ High-Side MOSFET

• High Efficiency at Light Loads with Pulse Skipping Eco-modeTM

• Low Dropout at Light Loads with Integrated BOOT Recharge FET

• 146-μA Operating Quiescent Current

• 2-μA Shutdown Current

• 100-kHz to 2.5-MHz Fixed Switching Frequency

• Synchronizes to External Clock

• Adjustable UVLO Voltage and Hysteresis

• Internal Soft Start

• Accurate Cycle-by-Cycle Current Limit

• Thermal, Overvoltage, and Frequency Foldback Protection

• 0.8 V 1% Internal Voltage Reference

• 8-Terminal HSOIC with PowerPADTM Package

• –40°C to 150°C TJ Operating Range

• Create a Custom Design using the TPS54360 with the WEBENCH® Power Designer

2 Applications

12-V, 24-V and 48-V Industrial, Automotive and Communications Power Systems

3 Description

The TPS54360 is a 60-V, 3.5-A, step-down regulator with an integrated high side MOSFET. The device survives load dump pulses up to 65 V per ISO 7637. Current mode control provides simple external compensation and flexible component selection. A low ripple pulse skip mode reduces the no load supply current to 146 μA. Shutdown supply current is reduced to 2 μA when the enable pin is pulled low.

Undervoltage lockout is internally set at 4.3 V but can be increased using the enable pin. The output voltage start-up ramp is internally controlled to provide a controlled start-up and eliminate overshoot.

A wide switching frequency range allows either efficiency or external component size to be optimized. Frequency foldback and thermal shutdown protect internal and external components during an overload condition.

The TPS54360 is available in an 8-terminal thermally enhanced HSOIC PowerPADTM package.